8-Inch Wall-Mount Exhaust Fan | 576 CFM 🌬️

8-Inch Wall-Mount Exhaust Fan | 576 CFM 🌬️

 (xxxx Reviews)
Regular price $39.99
Regular price $39.99 Sale price
SAVE Liquid error (snippets/price line 119): Computation results in '-Infinity'% Sold out
 

BUNDLE & SAVE

 
add_shopping_cart

-

Ordered

local_shipping

- - -

Order Ready

redeem

- - -

Delivered

8-Inch Wall-Mount Exhaust Fan | 576 CFM 🌬️

8-Inch Wall-Mount Exhaust Fan | 576 CFM 🌬️

Regular price $39.99
Regular price $39.99 Sale price
SAVE Liquid error (snippets/price line 119): Computation results in '-Infinity'% Sold out
thenuvaroWorkshop ventilation

✦

Wall-mount exhaust fan

Give stale air a way out.

Vent a stuffy garage or workshop with a compact steel fan and a simple switch on the cord.

Black 8-inch wall-mount exhaust fan with a silver wire grille and inline switch. Rated 576 CFM and 55 W.
  • 🌬️ Exhausts stale air

  • 🔘 Inline on/off

  • 🛠️ Steel housing

576 CFMRated airflow
55 WRated power
8 inNominal size
01 / Garage & workshop

Open up your workspace.

Put the fan on a suitable exterior wall to exhaust indoor air and keep your bench free for the job in front of you.

Black wall-mounted exhaust fan installed in a plywood-lined garage workshop.

Plan the outlet location and power access before mounting.

02 / Airflow

576 CFM of rated exhaust airflow.

The 55 W motor drives a steel-bodied fan built to move air out through the wall.

Close-up of the silver wire grille and blades on the 576 CFM wall exhaust fan.

When the fan is off, the backdraft damper closes to help reduce reverse airflow.

03 / Control

The switch is right on the cord.

Set the fan running when the shop feels stuffy, then switch it off at the cord when you’re done.

Black on/off switch on the exhaust fan’s power cord.
Single-speed fan with a dedicated on/off switch.
04 / Construction

Steel housing. Wire front guard.

A matte black faceplate frames the metal grille. The round housing extends 5.91 inches deep overall.

Three-quarter view of the exhaust fan’s steel housing and front wire grille.
05 / Wall mounting

Measure first. Mount once.

Allow room for the square faceplate, rear housing and cord.

Measure the mounting area.

Use the included mounting diagram to check the opening and clearances.

Choose a firm, dry wall.

Use the manual to check outlet direction. Keep the unit away from water spray.

Follow the installation instructions.

Disconnect power before installation or maintenance. The fan is rated for 120 V AC, 60 Hz.

06 / Size & contents

Check the actual dimensions.

This black 8-inch model has a 9.84-inch square faceplate. Use the dimensions below when planning your mount.

Front view of the black exhaust fan with a 9.84-inch square faceplate.
ModelHDB-200C
Overall size9.84 × 9.84 × 5.91 in
250 × 250 × 150 mm
Rear housing diameter7.80 in / 198 mm
Electrical rating120 V AC · 60 Hz · 55 W
Airflow576 CFM (rated)
Noise rating≤60 dB (manufacturer rating)
Fan weight4.01 lb / 1.82 kg

📦 In the box

One fan with cord and inline switch, four M4 × 35 screws, four wall anchors and a user manual.

Before you mount

Common questions

Is 8 inches the faceplate width?

8 inches is the nominal fan size. The square faceplate measures 9.84 inches on each side. Refer to the mounting diagram for the wall cutout.

How does the damper work?

It opens during operation and closes when the fan stops, helping limit backflow.

How should I clean the fan?

Disconnect power and follow the maintenance section of the manual. Keep the grille and motor area clear of dust buildup.

thenuvaro

A practical upgrade for your shop.

Check the wall fit and power access for the black 8-inch model.

View full details