4-in-1 Diamond Chamfer Bit for Angle Grinders – Chamfering, Hole Enlarging, Polishing & Arc Trimming, 5/8"-11 Thread, for Granite, Marble & Tile
4-in-1 Diamond Chamfer Bit for Angle Grinders – Chamfering, Hole Enlarging, Polishing & Arc Trimming, 5/8"-11 Thread, for Granite, Marble & Tile
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
4-in-1 Diamond Chamfer Bit for Angle Grinders – Chamfering, Hole Enlarging, Polishing & Arc Trimming, 5/8"-11 Thread, for Granite, Marble & Tile
4-in-1 Diamond Chamfer Bit for Stone, Tile & Granite
Chamfer edges, enlarge openings, polish surfaces, and create clean holes with one versatile diamond grinding head. Handle more stone-finishing tasks with fewer tool changes.
One Bit. Four Essential Functions.
Switch less and get more done. The shaped diamond head is designed for four useful stone-working tasks, from edge finishing to hole work.
Chamfer Edges
Shape exposed edges to create a cleaner, more finished profile.
Enlarge Holes
Work around existing openings to adjust their size and shape.
Polish Surfaces
Refine rough areas on suitable stone and tile surfaces.
Open Holes
Help create openings in suitable hard-surface materials.
Designed for a Range of Hard Materials
Take on common hard-surface finishing projects with a diamond bit designed for tile and stone work.
- Useful for edge shaping and hole-finishing tasks.
- Diamond abrasive is designed to work on hard surfaces.
- Use steady, controlled pressure for a more consistent finish.
Built for Efficient Dry Cutting
The diamond-coated working surface is designed for tile and stone applications. The product graphic also identifies built-in cooling wax to help reduce heat during dry use.
- Diamond-coated abrasive surface for hard-material work.
- Built-in cooling wax, as shown in the product construction graphic.
- Designed for dry cutting without a water supply.
Use the bit only within the operating conditions and speed limits specified by the tool manufacturer.
Standard 5/8"-11 Threaded Connection
The standard 5/8"-11 threaded connection is designed for compatible angle grinders with a matching spindle thread.
- Check your grinder's spindle thread before ordering.
- Install securely according to the grinder manufacturer's instructions.
- A suitable adapter is required when using a hand drill, as shown in the product image.
Compatibility also depends on the grinder or drill, guard, accessory speed rating, and manufacturer requirements. Do not use an adapter unless it is specifically suitable for the tool and accessory.
How to Start a Clean Hole
Follow the illustrated sequence for a more controlled start when creating an opening in a suitable surface.
- Step 1: Start at 45 DegreesBegin at an angle to establish the starting point.
- Step 2: Create a Guide GrooveMake a shallow guide groove to help position the bit.
- Step 3: Raise to 90 DegreesGradually bring the tool upright once the guide is established.
- Step 4: Maintain a Steady SpeedKeep the tool controlled and use light, even pressure.
Product Dimensions & Specifications
Check the key measurements and threaded connection before choosing this bit for your project.
| Overall Height | 2.76 in. |
|---|---|
| Top Diameter | 0.35 in. |
| Base Diameter | 1.97 in. |
| Thread | 5/8"-11 |
| Application | Dry cutting and finishing on suitable tile and stone surfaces |
The supplied size diagram also labels additional dimensions of 2.44 in. and 0.78 in. Refer to the diagram for their exact measurement locations. Please verify fit before use.
Support When You Need It
Shop with added peace of mind, backed by the service commitments listed for this product.
Warranty and return eligibility are subject to the store's applicable terms and conditions.
Frequently Asked Questions
What materials can this bit be used on?
The supplied product graphic shows ceramic tile, granite, marble, concrete, quartz and stone. Test on a small area first and follow the material and tool manufacturer's guidance.
Will it fit my angle grinder?
The bit has a 5/8"-11 threaded connection. Check that your angle grinder has a matching spindle thread and that the accessory is compatible with its rated speed.
Can I use it with a hand drill?
The product graphic indicates that a suitable adapter is required for hand-drill use. Confirm that the adapter and drill are specifically rated for this accessory and application before use.
Is this bit designed for wet or dry use?
The supplied product images describe dry cutting and state that no water is needed. This page therefore describes dry use only. Do not use it for wet grinding unless the manufacturer explicitly confirms that the specific bit and setup are rated for wet operation.
How do I start a clean hole?
The illustrated sequence shows starting at 45 degrees, creating a guide groove, raising the tool to 90 degrees, and continuing at a steady speed with light pressure.